If you selected Passbound testing, you see this prompt:
No. of passes : 00001
Specify the number of times (from 1 to 65535) you want to run the test(s), or press [Enl#l without entering a number to select the default of one pass. You can use the backspace key to make corrections.
Note
In most cases, running a test once is sufficient. Multiple passes test the reliability of essential functions only.
Error LoggingWhen you request error logging, you see this submenu:
Log errors on disk
Log errors to printer (LPT1)
Log errors to serial port
No error logging
Press [tl or [II to highlight the device on which you want the program to log the error messages and press &@. (Press c!3Eoc to exit the menu and return to the Error logging prompt.)
If you select No error logging, the program changes the error logging response from Y to N.
If you select the printer (LPT1), the program writes the error messages to the device connected to the parallel port assigned LPT1. If you select the serial port, the program writes the error messages to the device connected to the COM1 serial port.