Follow these steps to install an option card:

1.Remove the computer’s cover as described in Chapter 3.

2.If you are installing an option card that controls a mouse, you need to change the setting of jumper J2 on the main system board before you install the card. If you install a display adapter card, you may need to change the settings of jumpers J1 and J4. See page 4-4 for instructions.

3.Remove the retaining screw from the top of the metal option slot cover; hold on to the screw so it doesn’t fall into the computer. Lift out the slot cover.

Keep the screw to secure the option card to the computer. Store the slot cover in a safe place in case you remove the option card later.

Installing and Removing Options 4-13