To configure your computer for use with the RampagePlus 286+ memory card, you need to run CORFIX, a utility program on your Reference diskette; and then run SMART, the RampagePlus 286+ setup program.
Follow these steps to run CORFIX:
1.If you copied the CORFIX.EXE file to your hard disk, log onto the directory where it is stored. If you did not copy the file, insert the Reference disk in drive A. Then type A : and press IEnlw] to log onto that drive.
2.Type CORFIX and press m. You see the following message:
The program will configure the system to work with the SMART utility when installing the RampagePlus 286.
Smart can only be executed immediately after this configuration program. Continue? (Y/N)
3.To run the program, press [VI. To exit without running the program, press [Nl. If you press [VI, you see the operating system prompt and the following message:
Configuration completed. The SMART installation utility may now be used.
Now you can run the SMART setup program as described in your RampagePlus 286+ manual.
installing and Removing Options