Note

If your hard disk drive has a partition larger than 32MB and you are using MS-DOS, you must use the MS-DOS SHARE command to install file sharing and locking protection in a network environment. See your MS-DOS manual for instructions.

If you do not install SHARE, the following message flashes on your screen after you install your network software and reboot your computer:

WARNING! SHARE should be loaded for large media

Using a Password in Network Server Mode

When you turn on or reset the computer, it loads your operating system or network software and you see either the command prompt or the first screen displayed by your network software.

Follow these steps to enter your password:

1.Turn on or reset your computer. You do not see the password prompt even though the computer is now waiting for you

to enter the correct password.

2.Type your password and press I. The screen does not display what you type.

Now you should be able to use your computer. Press a key such as m to see if the keyboard accepts your command. If you entered an incorrect password, the computer does not respond. Type the correct password, press liEnlw , and try using the computer again.

2-8 Enhancing System Operations