Many hard disk drives, including all Epson drives, automatically park their heads when you turn off the computer. If your hard disk drive does not do this, or if you are not sure that it does, be sure to run HDSIT.
Follow these steps to run HDSIT:
1.If you copied the HDSIT.COM and HDSIT.VER files to your hard disk, log onto the directory where they are stored. If you did not copy the files to the hard disk, insert the Reference diskette in drive A. Then type A : and press @El to log onto that drive.
2.Type HDSIT and press [Ent#I
You see a message on the screen that telIs you the disk drive’s read/write heads will remain locked until you reset the computer or turn the power off and on again. The computer locks the heads and disables the keyboard. Remove any diskettes and turn off the computer. You are now ready to move it to the new location.