International character set for Italic table

You can select among several international character sets for the Italic character table. Each character set contains eight characters that vary depending on the country

or language, so you can customize the Italic table to suit your printing needs. See Appendix C for character samples.

Changing default settings

Follow the steps below to enter the default-setting mode and change the printer’s default settings.

Note:

o To print the language selection and default-setting mode5 instructions, you need three sheets of A4 or letter size single-sheet paper or three pages of continuous paper that is at least 279 mm

(11 inches) long and 210 mm (8.3 inches) wide. See Chapter 3 for instructions on loading continuous paper, or Chapter 4 for instructions on loading single sheets.

oIf you use single sheets, you need to load a new sheet of paper each time the printer ejects a printed sheet from the paper guide.

1. Make sure paper is loaded and the printer is turned off.

Caution:

c Whenever you turn off the printer, wait at least five seconds before turning it back on; otherwise, you may damage the printer.

2.Using the tables on pages 5-4 and 5-8, determine whether the setting you want to change is in default-setting mode 1 or 2.

Changing Printer Settings From the Printer’s Control Panel 5-9