4.Press the LF/FF D button to move the top-of-form position up on the page, or press the Load/Eject U button to move the top-of-form position down on the page.

Note:

oThe printer has a minimum and a maximum top-of-form position. If you try to adjust it beyond these limits, the printer beeps and stops moving the paper.

oWhen the paper reaches the default top-of-form position,

the printer also beeps and stops moving the paper briefly. You can use the default setting as a reference point when adjusting the top-of-form position.

5.After you set the top-of-form position, press the Pause button to exit micro adjust mode.

3-36Printing on Continuous Paper