Epson FX-880 Wrong top-of-formposition, Your printing appears too high or low on the page, The printer does not feed continuous paper to the standby position

The printer does not feed continuous paper to the standby position.

Cause	What to do
You have not torn off the	Tear off the printed pages at the
printed pages before pressing	perforation. Then press the Load/Eject
the Load/Eject button.	button to feed the paper backward to
	the standby position.

Wrong top-of-form positionYour printing appears too high or low on the page.

Cause	What to do
The paper size setting in your	Check the paper size setting in your
application software or	application or printer driver.
printer driver does not match
the size of the paper you are
using.

The printer’s page length settings for the front or rear tractor do not match the size of the continuous paper you are using.

Check the page length settings for the front or rear tractor using the printer’s default-setting mode or the EPSON Remote! utility. See “Making Default Settings” in Chapter 5, or “Using the EPSON Remote! utility” in Chapter 2.

7

The top margin or top-of-form position setting is incorrect.

Check and adjust the margin or top-of-form position settings in your application software. See the printable area specifications in Appendix C.

You can also adjust the top-of-form position in micro adjust mode. However, settings made in Windows applications override settings made in micro adjust mode. See “Adjusting the Top-of-Form Position” in Chapter 3.

Troubleshooting

Troubleshooting 7-7