Too many sheets are loaded in Load less than 150 sheets of paper. See

the cut-sheet feeder. You Appendix A for more information. cannot load more than 150

sheets of paper in the high-capacity cut-sheet feeder.

The edge guides of the

Align the left edge guide with the

cut-sheet feeder are not

arrow mark, then move the right edge

positioned correctly.

guide to match your paper’s width.

 

 

There is only one sheet left in

Add more paper to the cut-sheet feeder.

the bin.

 

The printer does not load continuous paper or does not feed it properly.

Cause

What to do

The paper release lever is not set correctly.

Set the paper release lever to the position for the paper source you want to use. For more information on setting the paper release lever, see the section in Chapter 3 on loading paper with the tractor you want to use.

Single-sheet paper is in the

Press the Load/Eject button to eject

paper path.

the sheet.

 

 

Continuous paper is not

See Chapter 3 for instructions on

loaded properly.

loading continuous paper with the

 

tractor you want to use.

 

 

The paper thickness lever is not set correctly.

Set the paper thickness lever to match the thickness of your paper. See “Setting the Paper Thickness Lever” in Chapter 3.

7-6Troubleshooting