Character Tables

You can select the character tables shown in this section with the printer’s default-setting mode or by using software commands.

Note:

Most of the character tables are the same as the PC 437 table for hex codes 00

 

C

through 7F; for these tables, only the characters for hex codes 80 through FF

are shown.

 

The character tables with an asterisk (*) after the table name are available

 

 

only in some countries.

 

You can choose between the two IBM character tables shown below when

 

you select IBM 2380 Plus/2381 Plus emulation in the default-setting

 

mode, as described in Chapter 5. (When you select Table 1, hex codes 00

 

to 1FH and 80 to 9FH are replaced; when you select Table 2, hex codes 00

 

to 1FH are replaced.)

 

Table 1

Table 2

Specifications C-17