13.When the printer receives data, it will start printing at the current position without advancing the paper. If necessary, follow the steps in “Adjusting the Top-of-Form Position” on page 3-35 to adjust the current position of the paper.

Caution:

c Never use the knob to adjust the top-of-form position; this may damage the printer or cause it to lose the top-of-form

position.3

14.Attach the printer cover by inserting the front tabs into the slots on the printer, then lowering the cover into place.

15.Send a print job to the printer. The printer starts printing from the top-of-form position. After you finish printing, tear off the printed document at the perforation nearest the paper exit slot.

Printing on Continuous Paper

3-27