Epson FX-880 Using Windows 95 plug-and-play, Setup.exe, My Computer, Double-click, Insert Disk 1 of your printer driver software in a disk drive

1.Make sure Windows 95 or NT 4.0 is running and the printer is off.

2.Insert Disk 1 of your printer driver software in a disk drive. Double-click the My Computer icon, and then double-click the drive in which you inserted the disk.

3.Double-click the Setup.exe icon, then select your printer icon in the EPSON Printer Driver Setup dialog box shown below. Click OK and follow the on-screen instructions.

n

After you install the printer driver for Windows 95, you can install the EPSON Status Monitor 2 utility program. See Chapter 6 for information on installing and using the Status Monitor.

Using Windows 95 plug-and-play

If you are using Windows 95 and want to install the driver using plug-and-play, follow the steps below.

Note:

You can install the printer driver using plug-and-play only if your computer has an IEEE-1284 compatible, bidirectional parallel port. See your computer documentation for more information.

1.Make sure the printer is connected to your computer as described on page 1-11.

1-14Setting Up the Printer