Caution:

c Never use the knob to adjust the top-of-form position; this may damage the printer or cause it to lose the top-of-form position.

Removing the printed document from the front push tractorTo remove the printed document, follow the steps below.

1.Press the Tear Off/Bin button to feed the paper’s perforation to the tear-off edge of the printer cover.

Note:

If your paper’s perforation is not properly aligned with the tear-off edge, you can adjust the tear-off position using the micro adjust feature as described in “Adjusting the tear-off position” on page 3-38.

Caution:

c Never use the knob to adjust the tear-off position; this may damage the printer or cause it to lose the top-of-form position.

2.Tear off the printed document using the tear-off edge of the printer cover.

3.To feed the continuous paper backward out of the printer and into the standby position, press the Load/Eject button.

To remove the remaining paper from the printer, press the Load/Eject button to feed the paper backward to the standby position. Then open the sprocket covers of the tractor and remove the paper.

c

Caution:

Always tear off your printed document before you press the

 

Load/Eject button. Reverse feeding several pages at a time may

 

cause a paper jam.
3-12Printing on Continuous Paper