Epson FX-880 Using the Tractor in the Front Push Position, Installing the tractor in the front push position

1.Tear off the fresh supply of continuous labels at the perforation nearest the paper entry slot.

perforation nearest the paper entry slot

2.Hold down the LF/FF button to eject the remaining labels from the printer.

c	Caution:
	Never feed labels backward using the Load/Eject or Tear
	Off/Bin button. When fed backward, labels can easily come off the
	backing sheet and cause a paper jam.

Using the Tractor in the Front Push PositionInstalling the tractor in the front push position

Before installing the tractor in the front push position, remove it from its current position. If the tractor is in the rear push position, remove the paper guide and then press the tractor’s lock tabs while lifting it out. If the tractor is in the pull position, remove it as described on page 3-28.

Note:

The tractor is installed in the rear push position when the printer is shipped.

3-6Printing on Continuous Paper