It is best to select the paper path in your application program because

software settings usually override the printer’s control panel settings. A However, if you cannot select the paper path in your application, select a

path by pressing the Tear Off/Bin button until the light indicates the bin you want as shown below.

n = On o = Off f = Flashing

The cut-sheet feeder you selected automatically loads paper when the printer receives data.

Using an Optional Front Sheet or Front Paper Guide

The optional front sheet guide (C81400]/C80401]) and front paper guide (C81402]/C80403]) fit inside the front of the printer. These options allow you to load single sheets and carbonless single-sheet multi-part forms of up to 6 parts (one original and five copies). Paper used with front guides must be 148 to 257 mm (5.8 to 10.1 inches) wide and can only be loaded one sheet at a time.

The optional front sheet guide provides you with the best paper jam prevention, but you need to remove the tractor from the front push position to use it. You can use the optional front paper guide without removing the tractor from the front push position.

The installation and paper loading procedures described below apply to both the front paper guide and the front sheet guide. Separate illustrations are provided where necessary; please refer to the appropriate illustrations when installing and using these options.

Enhancing Your Printer With Options A-15