Removing the paper from the pull tractor

To remove continuous paper from the pull tractor, follow the steps below.

1.After you finish printing, tear off the paper supply at the perforation nearest the paper entry slot.

2.To feed the paper forward and eject it, hold down the LF/FF button.

c

Caution:

Never press the Load/Eject or Tear Off/Bin button when you

 

are using the pull tractor; the paper could come off the pull tractor

 

and jam the printer.

Removing the tractor from the pull tractor position

To remove the tractor from the pull position, follow the steps below.

1.Remove any paper loaded on the pull tractor as described in the previous section.

2.Turn off the printer. Then lift the printer cover by its back edge and then pull it straight up and off the printer.

3-28Printing on Continuous Paper