Using the Optional Cut-Sheet Feeders

Two types of optional cut-sheet feeders are available for use with your printer: the single-bin cut-sheet feeder (C80637]/C80369]) and the high-capacity cut-sheet feeder (C80638]/C80640]). You can use either one of these separately, or you can use both feeders together as a double-bin cut-sheet feeder to automatically load two different types of single-sheet paper.

The single-bin cut-sheet feeder holds up to 50 single sheets. The high-capacity cut-sheet feeder holds up to 150 single sheets or up to 25 envelopes.

Caution:

c Dofeeder.not load multi-part forms, carbon paper, or labels in the cut-sheet

To install the single-bin, high-capacity, or double-bin cut-sheet feeder, see the next section. However, before installing the double-bin cut-sheet feeder, you must assemble it as described on page A-13. To load paper in a bin, see “Loading paper in the single-bin cut-sheet feeder” on page A-6, or “Loading paper in the high-capacity cut-sheet feeder” on page A-10.

Note:

You cannot install and use the optional cut-sheet feeders when the tractor unit is installed in the pull position. To remove the tractor from the pull position, see page 3-28.

Installing an optional cut-sheet feeder

You install the single-bin, high-capacity, and double-bin cut-sheet feeders in the same way. Follow the steps on the next page.

Note:

Before you install the double-bin cut-sheet feeder, you need to assemble it as described on page A-13.

A-4Enhancing Your Printer With Options