Epson FX-880 Control Panel Buttons and Lights

Control Panel Buttons and Lights

Font lights	Micro Adjust	Paper Out light
Indicate which font is	Using the micro adjust	∙ On when no paper is loaded in
selected. To select a font,	feature, you can press the D	the selected paper source or
see Chapter 5.	and U buttons to adjust the	paper is not loaded correctly.
	top-of-form or tear-off	∙ Flashes when paper has not
	position. See Chapter 3.	been fully ejected or a paper
		jam has occurred.

			Operate button
			Turns the printer on
			and off. The printer
			is off when the top
			of this button is even
			with the button
			protectors.
Tear Off/Bin button	LF/FF button	Load/Eject button	Pause button
∙ Feeds continuous	∙ Feeds paper line by	∙ Loads a single sheet	∙ Stops printing
paper forward to	line.	of paper.	temporarily, and
the tear-off position.	∙ Ejects a single sheet	∙ Ejects a single sheet	resumes printing
∙ Feeds continuous	or advances	of paper if a sheet is	when pressed again.
paper backward from	continuous paper to	loaded.	∙ When held down for
the tear-off position to	the next top-of-form	∙ Loads continuous	three seconds,
the top-of-form	position when held	paper from the	enters the micro
position.	down.	standby position.	adjust mode. When
∙ Selects a cut-sheet		∙ Feeds continuous	pressed again, exits
feeder bin when the		paper backward to	the micro adjust
cut-sheet feeder is		the standby position.	mode.
installed.			Pause light
Tear Off/Bin light			∙ On when the printer
∙ Flashes when			is paused.
continuous paper is in			∙ Flashes when the
the tear-off position.			printer is in the micro
∙ On when bin 1 of the			adjust mode.
optional cut-sheet
feeder is selected.
∙ Off when bin 2 of the
optional cut-sheet
feeder is selected.