1.Make sure the printer is turned off. Then remove the paper guide by

moving it to the upright position and pulling it straight up. Lift the

A

printer cover by its back edge and then pull it straight up and off the

printer.

 

2.Holding the cut-sheet feeder in both hands, press down on the latch levers and fit the notches over the printer’s mounting posts, as shown below. Release the latch levers to lock the feeder in place. If you are installing the high-capacity or double-bin cut-sheet feeder, see the illustration on the next page.

single-bin cut-sheet feeder

Enhancing Your Printer With Options A-5