Epson FX-880 The printer does not fully eject a single sheet, The paper does not feed properly with the optional cut-sheetfeeder

The paper on the paper guide	Move the paper (and the edge guides) a
is positioned too far to the left	little to the left or right.
or right for the printer to
detect that it is there.
Single-sheet paper is not	See Chapter 4 for instructions on
loaded properly.	loading single-sheet paper.
The paper thickness lever is	Set the paper thickness lever to match
not set correctly.	the thickness of your paper. See
	“Setting the Paper Thickness Lever” in
	Chapter 3.
Paper is creased, old, too thin,	See the paper specifications in
or too thick.	Appendix C and use new, clean sheets
	of paper.

The printer does not fully eject a single sheet.

Cause	What to do
Paper is too long.	Press the Load/Eject button to eject
	the sheet. Make sure the page length of
	your paper is within the range
	specified for single-sheet paper in
	Appendix C. Also check and adjust the
	paper size setting in your application
	or printer driver.

The paper does not feed properly with the optional cut-sheet feeder.

Cause	What to do
The cut-sheet feeder is not	Reinstall it as described in Appendix A.
installed properly.

7

Troubleshooting

Troubleshooting 7-5