Selecting a Built-In Font

Your printer comes with the three built-in fonts shown in the table below. You can also choose from the following six pitch (character size) settings: 10, 12, 15, 17, or 20 cpi (character per inch), or proportional spacing.You can select the font and pitch using the buttons on the printer’s control panel as described below.

Note:

Settings you make in your application programs usually override settings you make from the printer’s control panel. For best results, use your application to select a font and pitch.

FontSample

Draft

Roman

Sans Serif

Follow these steps to select a built-in font or pitch using the buttons on the control panel:

1.Make sure that the printer is not printing. If it is, press the Pause button to stop printing.

2.To select a font, press the Font button until the two Font lights indicate the font you want as shown below.

Font lights

Font

 

 

o n

Draft

 

 

n o

Roman

 

 

n n

Sans Serif

 

 

n= On, o = Off

5-2Changing Printer Settings From the Printer’s Control Panel