*See Appendix C for complete paper specifications.

**It is recommended that multi-part forms be used in the front push or pull position.

***Continuous paper with labels cannot be used with the rear push tractor. To use them, install the optional tractor unit in the front push

or pull position.

2

**** Always load multi-part forms with 7 parts (one original plus 6

copies) from the front or bottom slot onto the pull tractor.

Note:

❏If the printed image is smeared, you may need to set the paper thickness lever one position higher to improve print quality.

❏If the printed image is faint or has many gaps, you may need to set the paper thickness lever one position lower to improve print quality.

Printing on Continuous Paper 2-5