7.Make sure your paper has a clean, straight edge. Then open both sprocket covers and fit the first three holes of the paper, printable side down, over the tractor pins. Then close the sprocket covers.

2

front of the printer

8.Slide the right sprocket to remove any slack in the paper; then lock it in place by pushing the sprocket lock down.

9.Attach the paper guide base as described on page 1-12. After installing the paper guide, grab the center section of the paper guide, lift it up and lay it flat.

10.Slide the edge guides to the middle of the paper guide base. Then close the paper guide cover.

Note:

The printer cannot print when the cover is open.

Printing on Continuous Paper 2-9