7. Make sure your paper has a clean, straight edge. Then open
both sprocket covers. |
|
8. Insert the paper into the front, bottom, or rear paper slot as |
|
described below until it emerges between the platen and the | 2 |
ribbon guide. Then pull up the paper until the perforation |
between the first and second pages is even with the top of the printer’s ribbon.
Before you load paper in the front slot, remove the front paper guide. Then load paper printable side up.
Load paper in the bottom slot printable side up (forward).
Before you load paper in the rear slot, remove the paper guide base. Then load paper in the rear slot, printable side down and attach the paper guide base.
Printing on Continuous Paper