3.Hook the tension lever onto both ends of the stand as shown below.
While pulling up the tension lever, fit the wire ends of the tension lever | A |
into the holes in the stand. The roll paper holder is assembled. |
tension lever
Installing the roll paper holder
To install the roll paper holder, follow the steps below.
1.Make sure the printer is turned off.
2.Position the roll paper holder underneath the printer as shown below. Fit the two positioning pegs on the bottom of the printer into the two holes in the base plate.
cCaution:
The roll paper holder is not fastened to the printer; only the printer’s weight and the two positioning pegs hold it in place. If you pick up the printer, be careful not to drop the roll paper holder.
Enhancing Your Printer With Options