Changing default settings

Follow the steps on the next page to enter the default-setting mode and change the printer’s default settings.

Note:

❏To print the language selection and default-setting mode instructions, you need three sheets of A4 or letter size single-sheet paper, or three pages of continuous paper that is at least 279 mm (11 inches) long and 210 mm (8.27 inches) wide. See Chapter 2 for instructions on loading continuous paper, or Chapter 3 for instructions on loading single sheets.

❏If you use single sheets, you need to load a new sheet of paper each

time the printer ejects a printed sheet.

5

 

1.Make sure paper is loaded and the printer is turned off.

c Caution:

Whenever you turn off the printer, wait at least five seconds before turning it back on; otherwise you may damage the printer.

2.Hold down the Pitch button while you press the Operate button to turn on the printer. The printer enters the default- setting mode and prints the language selection instructions.

3.Press the Pitch button until the Font lights indicate the language you want, as described in the language selection instructions.

4.Press the Font button to print the default-setting mode instructions (two pages) in the language you selected.

Changing Printer Settings From the Printer’s Control Panel 5-9