Wrong tear-off position

The printer prints on (or too far away from) the perforation of your continuous paper.

Cause

What to do

 

 

The tear-off position setting

Adjust the tear-off position using the

is incorrect.

micro adjust feature. See“Adjusting

 

the tear-off position” in Chapter 2.

You moved the paper using the knob while the printer was on.

Adjust the tear-off position using the micro adjust feature. See“Adjusting the tear-off position” in Chapter 2.

cCaution:

Never use the knob to adjust the tear-off position; this may damage the printer or cause it to lose the tear-off position.

The printer you want to use

Choose the correct printer from the

is not selected in your

Windows desktop or in your

software.

application before printing.

 

 

The paper size setting in

Check the paper size setting in your

your application or printer

application or printer driver.

driver does not match the

 

size of the paper you are

 

using.

 

The printer’s page length settings for the front or rear tractor do not match the size of the continuous paper you are using.

Check the page length settings for the front or rear tractor using the printer’s default-setting mode or the EPSON Remote! utility. See“About Your Printer’s Default Settings” in Chapter 5, or “Using the EPSON Remote! Utility” in Chapter 4.

7-10Troubleshooting