State of

Beep

Problem

panel lights

pattern

 

Solution

 

 

 

 

 

f Paper Out

•••

Continuous paper is not fed to the standby position.

n Pause

 

 

 

Tear off the printed document at the perforation; then

 

 

 

 

press the Load/Eject button. The printer feeds the paper

 

 

to the standby position. Press the Pause button to turn off

 

 

the Pause light.

 

 

 

 

•••

A single sheet of paper is not fully ejected.

 

 

 

 

 

Press the Load/Eject button to eject the sheet. Then press

 

 

the Pause button to turn off the Pause light, if necessary.

 

 

 

 

•••

Paper is jammed in the printer.

 

 

 

 

 

Clear the paper jam as described on “Clearing Paper

 

 

Jams” on page 7-16.

 

 

 

f Pause

The print head is overheated.

 

 

 

 

 

Wait a few minutes; the printer resumes printing

 

 

automatically once the print head cools.

 

 

 

f Paper Out

An unknown printer error has occurred.

f Pause

 

 

 

Turn off the printer and leave it off for several minutes; then

f f

 

 

turn on the printer again. If the error recurs, contact your

Tear Off/Bin

 

 

dealer.

f f Font

 

 

 

 

 

 

n= on, f = flashing

•••= short series of beeps (three beeps), ••••• = long series of beeps (five beeps)

Note:

The printer beeps once if you press a control panel button when the corresponding function is not available.

7

Troubleshooting

Troubleshooting 7-3