Using the Rear Push Tractor
To use the rear push tractor, load continuous paper in the rear slot. For information on when to use the rear push tractor, see “Available Paper Paths” on page 3.
Note:
The tractors are installed in the front push and rear push positions when the printer is shipped. The rear push tractor cannot be removed.
Loading paper onto the rear push tractor
If a tractor is installed in the pull position, you need to remove it and install the paper tension unit as described on page
Note:
To avoid paper jams, it is best to load thick
cCaution:
Do not load continuous paper with labels in the rear paper slot; the labels may come off their backing sheet inside the printer and cause a paper jam.
To load paper onto the rear push tractor, follow these steps:
1. Make sure the printer is turned off.