11. Attach the printer cover and close the paper guide cover.
Note:
The printer cannot print when the printer cover is open.
12. You may need to check and change the printer driver settings as described in Chapter 4. Then send a print job to the printer. The printer starts printing from the current position without advancing the paper. The printed pages are fed over the paper guide toward the back of the printer.
13.After you finish printing, open the paper guide cover; then tear off the printed document at the perforation nearest the paper exit slot.
To remove the paper from the tractors, follow the steps under “Removing the paper from the pull tractor” on page
Removing the pull tractor
To remove the tractor from the pull position, follow these steps:
1.Remove any paper loaded on the pull tractor as described on page
2.Turn off the printer. Then remove the printer cover and lift the paper guide up and off the printer.
2
Printing on Continuous Paper