11. Move the cut-sheet feeder’s paper selection lever to the single-sheet | A |
position, as shown below. Then lift up the center support and close the |
paper guide cover. |
Note:
❏Always close the printer cover before printing. The printer does not print when the cover is open.
❏When the cut-sheet feeder is installed, you can still load single sheets one at a time using the front paper slot.
The cut-sheet feeder automatically loads paper when the printer receives data. Printed pages are stacked on the center support. If you need to eject a sheet, press the Load/Eject button.
If the first printed line on your page appears too high or low, you can adjust its position using the micro adjust feature. See “Adjusting the Top-of-Form Position” on page 2-39.
cCaution:
Never use the knob to adjust the top-of-form position; this may damage the printer or cause it to lose the top-of-form position.
Enhancing Your Printer With Options A-9
