6.Pull both paper set levers forward until the paper guides retract and lock open to allow paper loading.
7.Take a stack of paper (up to 150 sheets of plain paper) and fan it. Next, tap the side and bottom edges of the paper on a flat surface to even up the stack.
8.Insert the paper stack printable side down along the left paper guide.
9.Adjust the right paper guide so that it matches your paper’s width. Make sure the position of the guide allows the paper to move up and down freely. Then push the lock lever backward to lock the paper guide.
10.Push back the paper set levers to clamp the paper against the guide rollers.