❏EPSON Remote! (a DOS-based printer setup utility)

The EPSON Remote! utility allows you to easily change the printer’s default settings from the computer screen. To use the EPSON Remote! utility with DOS, see page 4-23.

To install the printer software, see "Installing the printer software in Windows 98, 95, or NT 4.0" or "Installing the printer software in Windows 3.1 or NT 3.5x" in this section. If you are using DOS, see “For DOS programs” on page 1-21.

Installing the printer software in Windows 98, 95, or NT 4.0

Follow the steps below to install the printer software in Windows 98, 95, or NT 4.0:

Note:

❏Installing the printer software for Windows NT 4.0 may require network administration privileges. Ask your network administrator for more information.

❏If you wish to make a diskette version of the printer software on your CD-ROM, insert the CD and run the EPSETUP program. In the dialog box that appears, click the Driver disk creation utility button and follow the on-screen instructions.

❏If you are using the diskette version of the EPSON software, make a backup copy of the EPSON printer software disk or disks before you begin installation.

1.Make sure Windows 98, 95, or NT 4.0 is running and the printer is off.

2.Insert the printer software CD-ROM in the CD-ROM drive. The Install dialog box appears. (If you are using diskettes, insert the diskette in a disk drive, then double-click the drive icon and double-click the Setup.exe icon.)

3.Click Install to start the printer software installation, and follow the instructions.

1-18Setting Up the Printer