Caution: |
|
c There are several models of the printer designed for different | 1 |
voltages, and it is not possible to adjust the printer for use with |
another voltage. If the label on the back of the printer does not show the correct voltage for your country, contact your dealer.
You must remove all protective materials packed around and inside your printer before you set it up and turn on the power. Follow the directions on the Notice Sheet (packed with the printer) to remove these materials. A screwdriver has been provided for removing the transportation screw.
Save all packing and protective materials, including the transportation screw and the protective locking clips on the paper tension unit, in case you need to ship the printer in the future. It should always be transported in its original packaging or equivalent materials.
Setting Up the Printer