❏Before printing, turn on the card mode by pressing the Tear Off/Bin button until both Tear Off/Bin lights are on. After you finish printing on postcards, press the Tear Off/Bin button once to exit the card mode. (Bin 1 of the optional cut- sheet feeder is selected.)
❏Use postcards only under normal temperature and humidity conditions, as follows:
Temperature
Humidity
Loading Single Sheets in the Top Paper Slot
To load paper in the top slot, follow these steps:
1.Make sure the paper guide base is installed properly. If not, attach it as described on page
2.Open the paper guide cover. Slide the left edge guide until it locks in place next to the arrow on the paper guide. Next adjust the right edge guide to match the width of your paper.