Removing continuous paper
1. After you finish printing, press the Tear Off/Bin button. The
printer advances the paper to the tear-off position.
Note:
When the auto tear-off function is on, the printer advances the paper
perforation to the tear-off position automatically. You can turn on
the auto tear-off function by using the printer’s default-setting mode
or the EPSON Remote! utility. For instructions, see “Using the
Default-Setting Mode” in Chapter 4, or open EPSON Remote! as
described in Chapter 2 and follow the on-screen instructions.
2. Tear off the printed pages.
3. Press the Load/Eject button to feed the continuous paper
backward out of the printer and into the standby position.
4. To completely remove continuous paper from the printer, open
the sprocket covers. Remove the paper from the tractor unit,
and then close the sprocket covers.
Using Multi-part Forms Your printer can print on both single-sheet and continuous
multi-part forms. It can use multi-part forms with up to five parts
including the original.
cCaution:
Use only carbonless multi-part forms.
Before printing, set the paper thickness lever to the correct position
for your multi-part forms as described in the table on page 3-6.
LAdonis Rev.E
A5 size Chapter 3
97/04/07 pass 0
3-20 Paper Handling