Epson T81 specifications Character Specifications, Autocutter, Character Size

Confidential

1.2 Character Specifications

1) Number of characters:

Alphanumeric characters:

95

Extended graphics:

128 ⋅ 11 pages

(including one space page)

International characters:

48

2) Character structure:

Font A:

12 ⋅ 24 (including 2-dot spacing in horizontal)

Font B:

9 ⋅ 17 (including 2-dot spacing in horizontal)

NOTE: Font A is selected as the default

3) Character size:

See Table 1.2.1.

Table 1.2.1 Character Size

Standard

Double-height

Double-width

Double-width/

Double-height

W⋅H (mm)

cpl

W⋅H (mm)

cpl

W⋅H (mm)

cpl

W⋅H (mm)

cpl

Font A

12⋅24

1.41⋅3.39

42

1.41⋅6.77

42

2.82⋅3.39

21

2.82⋅6.77

21

Font B

9⋅17

0.99⋅2.40

56

0.99⋅4.80

56

1.98⋅2.40

28

1.98⋅4.80

28

Space between characters is not included.

Characters can be scaled up to 64 times as large as the standard sizes. cpl = characters per line

4)Supporting character on each model type: See Table 1.2.2.

1.3Autocutter

1) Cutting method:	Scissors type with separated blades
2) Cutting type:	Partial cut (cutting with one point in left edge left uncut)

NOTES: 1. To prevent dot displacement, after cutting, feed paper approximately 1 mm {14/360"} or more before printing.

2.Paper must be fed over 40 mm {1.57"} before cutting if the printer is stopped. This prevents a possible paper jam.

TITLE

EPSON

TM-T81	SHEET	NO
	REVISION
Specification
		NEXT	SHEET
(STANDARD)	A
		3	2