Epson T81 - page 14

Confidential
EPSON
TITLE SHEET
REVISION NO
SHEETNEXT
5 4
TM-T81
Specification
(STANDARD) A
4) Specified original paper type no.:
The following original paper can be used:
NOTE: If paper other than the specified paper is used, the pr i nt head may be damaged or the print
quality may be poor. Therefore, it is recommended to use the specif ied paper or its
equivalent.
Table 1.5.1 Specified Original Paper Typ e No . (Single-color paper)
Original Paper Type No. Manufacturer
TF50KS-E, TF60KS-E NIPPON Paper Industries Co., Ltd.
PD150R, PD160R, PD190R OJI Paper Mfg. Co., Ltd.
P220AGB-1 Mitsubishi Paper Mills Limited.
P300, P310, P350 Kanzaki Specialty Papers
AF50KS-E Jujo Thermal Oy
F5041 Mitsubishi HiTec Paper Flensburg GmbH
5) Print density adjustment
• It is recom m ended t o set the pr int densit y dependi ng on the paper type as shown i n the tabl e
below to keep the print quality. The print density can be set with the DIP switch.
Table 1.5.3
Original Paper No. Density Level
TF50KS-E, PD150R, PD160R, F5041 Standard
TF60KS-E, P220AGB-1, P300, P310, P350 Medium
AF50KS-E Medium
PD190R Medium
• The pri nt density can also be set with the GS ( E command.
Table 1.5.4
Original Paper No. Density Level
TF50KS-E, PD150R, PD160R, F5041 7
TF60KS-E, P220AGB-1, P300, P310, P350 8
AF50KS-E 9
PD190R 10
6) Notes on preprinting on the recording surface of therm al paper
When using thermal paper, the recordi ng surface of which has been preprinted, sti cking (a
problem of the thermal head sticking t o the surface of the thermal paper during printi ng) may
occur, causing faulty printing and other problems. I t is, therefore, strongl y recommended to
avoid using preprinted thermal paper. If such paper must be used, conduct prepri nting tests
under the conditions recommended by the paper manufacturer ( type of ink/print conditions) and
confirm that no faulty pri nting or any other problems occur before you use it f or actual printing.