Operation, cont’d

IN1404XT Video Scaler and Switcher • Operation3-30

Troubleshooting
This paragraph gives recommendations on what to do if you have problems
operating the scaler, and it provides examples and descriptions for some image
problems you may encounter.
The following tips may help you in troubleshooting.
1. Some symptoms may resemble others, so you may want to look through all of
the examples before attempting to solve the problem.
2. Be prepared to backtrack in case the action taken does not solve the problem.
3. It may help to keep notes and sketches in case the troubleshooting process
gets lengthy. This will also give you something to discuss if you call for
technical support.
4. Try simplifying the system by eliminating components that may have
introduced the problem or made it more complicated.
5. For sync-related problems: Portable digital projectors are designed to operate
close to the video source. Sync problems may result from using long cables or
from improper termination. A sync adapter, such as Extron’s ASTA (active
sync termination adapter), may help solve these problems.
6. For LCD and DLP projectors and plasma displays: In addition to the sync-
related information above, check the user’s manual that came with the
projector for troubleshooting tips, as well as for settings and adjustments.
Each manufacturer may have its own terms, so look for terms like “auto
setup”, “auto sync”, “pixel phase”, and “tracking”.

General checks

1. Ensure that all devices are plugged in and powered on. The scaler is receiving
power if one of the Input LEDs is lit.
2. Ensure that the input selected is active.
3. Ensure that the proper signal format is supplied.
4. Check the cabling and make corrections as necessary.
5. Call the Extron S3 Sales & Technical Support Hotline if necessary.