Extron electronic System 7SC manual Clearing IR commands from memories

Clearing IR commands from memories

The memory for each Display, Room, or input selection button can either be clear (empty, no stored commands are associated with the button) or saved (containing an IR command that is saved in nonvolatile memory). To clear IR commands from a button’s memory:

1.

2.

3.

4.

5.

Extron

System 7SC

MENU

SWITCHER SETUP/ CONFIGURATION

MENU

From the main menu press the Menu button until the IR Learning Configuration menu appears.

Scroll through the submenu to the desired button by pressing the Next button.

Rotate the Adjust knob () to toggle from the button’s status to the Clear command.

Press the Next button to clear the IR commands from that Display, Room, or input selection button’s memory.

Press Next to scroll to another button, or press Menu or allow the System 7 to time out to the main screen.

AUDIO/VIDEO

ADJUSTMENTS

MENU

IR LEARNING

CONFIGURATION

NEXT

From any screen in

this submenu, press MENU to go to the IR LEARNING menu.

Display Power: On

Status: Saved

Display Power: On

Learn?

Display Power: On	NEXT
Clear?

			Scrolls through
	Display Power: Off		buttons that
NEXT		NEXT	can have
	Status: Saved
			associated
			IR commands

Display Power: On	Display Power: On	NEXT
Clearing IR!	Status: Clear

The button's IR

codes have been

cleared from

memory.

Clearing IR commands from a button’s memory

System 7SC • Operation and Configuration 3-15