Control Software for Windows®
The included Extron SYSTEM 7SC Control Program for Windows offers another way to control the System 7 via
The control software must be used in order to download projector driver files into the System 7.
The control software is compatible with Windows 95/98, Windows NT, Windows 2000, and up. Extron’s System 7SC Control Program is included with the System 7, and updates can be downloaded from the Extron Web site (http://www.extron.com).
Installing the software
The control program is contained on a set of
To install the software on the hard drive:
1. | Run SETUP.EXE from the floppy disk. |
2. | Follow the instructions that appear on the screen. |
By default the installation creates a C:\System7 directory, and it places two icons (SYSTEM 7SC Control Pgm and SYSTEM 7SC Help) into a group or folder named “Extron Electronics”.
Using the control program
Many items found in the System 7SC Control Program are also accessible via front panel controls and the LCD menus described in chapters two and three. Refer to those chapters for details on features and settings. The SYSTEM 7SC Help Program provides information on settings and on how to use the control program itself. Some features, including the miscellaneous options, are only available via this control program. These features are described in the sections of this chapter that correspond to the parts of the control program where the features are found.
1.To run the control program,
2.Click on the comm port that is connected to the System 7SC’s
Mini Mode
The Mini Mode screen, shown below, allows input selection only.
