4-5System 7SC • Serial Communication

Video configuration

Set video signal type
X5
*
X4
\ Typ
X4
= ____ Set the input signal type. (Type =
Vid, Y-C, YUV, YUVp, or RGB)
Example: 2*7\ Typ7=YUVp Example: set input 2 to
progressive component video
View the video signal type
X5
\
X4
Show the video signal type.
Example: 6\ Typ1=Vid Example: show input 6 video type.

Color

Set a specific color value X10 C Col X10 Specify a color adjustment level.
Example: 47C Col047 Example: set the color adjustment to 47.
Increment +C Col X10 Increase color adjustment level.
Decrement -C Col X10 Decrease color adjustment level.
View the color value C Col X10 Show the color adjustment.

Tint

Set a specific tint value X10 T Tin X10 Specify a tint adjustment level.
Example: 176T Tin176 Example: set the tint to 176.
Increment +T Tin X10 Increase tint adjustment level.
Decrement -T Tin X10 Decrease tint adjustment level.
View the tint value T Tin X10 Show the tint adjustment.

Contrast

Set a specific contrast value X10 ^ Con X10 Specify the contrast adjustment.
Increment +^ Con X10 Increase the contrast.
Decrement -^ Con X10 Decrease the contrast.
View the contrast value ^ Con X10 Show the contrast setting.

Brightness

Set a specific value X10 Y Brt X10 Specify the brightness
adjustment.
Increment +Y Brt X10 Increase the brightness.
Decrement -Y Brt X10 Decrease the brightness.
View the brightness value Y Brt X10 Show the brightness setting.

Detail mode

Set the detail level X13 D Det X13 Specify the detail level.
View the detail value D Det X13 Show the detail setting.

Horizontal shift

Set horizontal position X10 H Hph X10 Specify the horizontal position.
Increment +H Hph X10 Shift right.
Decrement -H Hph X10 Shift left.
View the horizontal pos. value H Hph X10 Show the horizontal position.

Vertical shift

Set the vertical position X10/ Vph X10 Specify the vertical position.
Increment up +/ Vph X10 Shift up.
Increment down -/ Vph X10 Shift down.
View the vertical pos. value / Vph X10 Show the vertical position.
Command/response table for SIS commands (continued)

Command ASCII Command Response Additional description

(host to switcher) (switcher to host)