Room & Misc. Options

Use the Room & Misc. Options screen to set room relay modes and delay periods, power up/down delay periods, change projector communications settings, and perform other functions.

Special features

Tie (room relay) to Power — Enabling this feature for room relay 1 or room relay 2 will cause that relay to turn on/off when the Display Power is turned on or off.

Projector Comm — Set communications protocol (RS-232 vs. RS-422, baud rate, parity, data bits) in this section.

Misc. Options — This section provides a way to send (or not send) various commands, to mute audio, and to lock input selection when the Display Power is turned on or off. Descriptions of each item are available in the System 7SC Help file.

Limit initial power-up volume — Here you can specify an attenuation level for the initial volume of the audio output. If the Limit initial power-up volume box is not checked (enabled) or if the limit is set to 100%, the volume will not be limited (attenuated).

Auto shutoff — If Auto shutoff is enabled, the switcher monitors the time elapsed since the last input selection (or other function) and sends a display power off command (or that command and any other commands associated with the Display Power button) after a set period of inactivity. That period can be selected in fifteen-minute increments to be as long as 480 minutes (8 hours).

Saving and restoring configurations

The System 7SC can be configured by various means (IR learning, downloading, front panel adjustment, or combinations of those methods), and the configuration settings can be saved to a file for later use.

1.In the System 7SC Control Program, select File, then select Save Configuration as... .

2.Save the file as (filename).sy7. An unlimited number of configuration files can be saved on the PC as long as each file has a unique file name ending in .sy7.

3.To retrieve the configuration from within the System 7SC Control Program, select File, then select Restore Configuration from... . A set of all the switcher, scaler, picture, and audio adjustment settings, and also drivers will be downloaded into the System 7SC.

System 7SC • Serial Communication 4-15

Page 63
Image 63
Extron electronic System 7SC manual Room & Misc. Options, Saving and restoring configurations