FireplaceXtrordinair 44 DV XXL EF manual Optional Equipment for qualified installers only

5 2 Optional Equipment (for qualified installers only)

3Attach the starter ring to the fireplace following the directions below (use the most convenient side).

1/4" Nutdriver

Starter Ring

Remove and discard the cover plate.

Bend the tabs on the bottom of the starter ring up to lock it in place.

4Install the air duct. Each section, when joined, must be attached with three screws and duct tape (U.L. 181A-P or equivalent). Secure the duct if it is in an area where it may sag or become dislodged.

NOTE: The air duct has a 0” clearance to combustibles.

Secure all ducting together with screws. Then seal the seams with aluminum duct tape (U.L. 181A-P or equivalent).

Travis Industries 4050114 1 0 0 - 0 1 1 4 9