Optional Equipment (for qualified installers only) 5 1
2 Attach the blower box to the framing or floorboards of the home following the instructions below.
Wall or Ceiling Mounting
a | Cut a hole between wall | b | Attach the wall mounting | c | Slide the blower, with |
framing members for the | brackets to the blower box. | wires, into the hole cut | |||
| blower assembly. |
|
|
| in step "a". Attach |
|
|
|
|
| with four screws. |
16"*
Mount the bracket to these holes for 2 x 4 walls
Mount the bracket to these holes for 2 x 6 walls
* This blower was designed for framing on 16" centers - construct additional framing if needed.
Floor Mounting
a | Cut a hole between floor joists | b | Attach the floor boot to the blower box with the included screws. |
for the blower box. |
| ||
|
|
| The screws |
|
|
| attach to either |
|
| of these pairs of | |
|
| holes. Use the | |
| 14" |
| upper pair for |
|
|
| thick flooring, the |
|
|
| lower pair for |
|
|
| thin flooring. |
Slide the blower into the hole c cut in step "a". Attach with four
screws.
Travis Industries | 4050114 | 1 0 0 - 0 1 1 4 9 |
