FireplaceXtrordinair 44 DV XXL EF manual 8Operation, Starting The Pilot Flame

3 8Operation

Starting The Pilot Flame

The pilot flame is required to ignite the main
burners (it also plays a safety role). It should be left	a
on once lit. It will stay lit unless the gas control
valve is turned to "OFF". However, the pilot will go
out if the gas is shut off, the propane tank runs out
(or low) or if the stove malfunctions. If the pilot
turns off frequently, call your dealer for information.
To start the pilot follow the directions below:
WARNING:
When lighting or re-lighting the pilot,
the glass must be removed (see page
2 9 ) .	b
a Remove the glass (see page 29 for details).

bPush the gas control knob in slightly and turn it to the "OFF" position. The knob will not turn from "ON" to "OFF" unless the knob is depressed

	slightly. Wait five minutes to let any gas that may
	have accumulated inside the firebox escape. If	c
	you smell leaking gas, follow the directions on
	the cover "IF YOU SMELL GAS".
c	Turn the gas control knob to the "PILOT"
	position and press the knob in, this will allow gas
	to flow to the pilot light. Press the button on the
	pilot igniter repeatedly until you see the pilot
	light.	d
	WARNING:
	If the pilot does not light after 15
	seconds, release the knob and call your
	dealer for service. Do not attempt to
	light pilot until service has been
	performed .
	N O T E :	e
	You may wish to remove the log set to
	gain a better view of the pilot (see page
	3 1 ) .
d	Keep the gas control knob depressed for 30
	seconds once it is lit.
e	Release the gas control knob. If the pilot goes	f
	out, repeat step C. If the pilot refuses to stay lit,
	call your dealer for service. With the pilot lit,
	proceed to step “f”.
f	Replace the glass.
g	Turn the gas control knob counter-clockwise to
	"ON". The pilot is now lit and the heater can be
	turned on and off.	g

5 minutes

PILOT

IGNITER

30 seconds

?

Travis Industries 4050114 1 0 0 - 0 1 1 4 9