First Virtual Communications 3000 Mapping Logical Volume 0 Partition 1 to Channel 2 LUN

Figure 4-21 Selecting two drives to form a RAID 1 set		4-11
Figure 4-22	Viewing all Logical Drives	4-12
Figure 4-23	Adding Global Spare drive	4-12
Figure 4-24 Allocating Capacities to partitions		4-13
Figure 4-25 Logical Drive Partition Table		4-13
Figure 4-26 Allocating capacities to partitions		4-13
Figure 4-27 Mapping Host LUNs		4-14
Figure 4-28	LUN Partition table	4-14
Figure 4-29 Selecting a Volume for LUN mapping		4-15
Figure 4-30 Selecting a partition for LUN mapping		4-15
Figure 4-31 Mapping Logical Volume 0 Partition 1 to Channel 2 LUN 1		4-15
Figure 4-32 Logical mapping of all partitions		4-16
Figure 4-33 List and status of drives on system		4-16
Figure 4-34	Scanning SCSI drives	4-16
Figure 4-35 View and edit scsi drives		4-17
Figure 4-36 View and edit SCSI channels		4-18
Figure 4-37 View and edit SCSI target		4-19
Figure 4-38 View and edit configuration parameters		4-20
Figure 4-39 Uploading the code using ZMODEM protocol		4-21
Figure 4-40 View system information		4-22
Figure 4-41 Quick Installation		4-22

v