Fluke 192, 199, 196 user manual Using Scope Record in Triggered Single Sweep Mode, Level

Using The Recorder Functions	3
Recording Scope Waveforms In Deep Memory (Scope Record™)

Using Scope Record in Triggered Single Sweep Mode

To record, for example, the power-on event of an Uninterruptable Power Supply (UPS) it might be useful to start recording on an external trigger signal. The next example explains a typical triggered Single Sweep recording.

To set up the test tool, continue from step 3 of the previous section:

4Apply an Uninterruptable Power Supply signal to the red BNC input A. Apply a start signal to the red and black external trigger banana inputs. (See Figure 19.)

5	Open the Recorder Options
	menu.

6 Jump to Display Glitches.

7 Select Yes, then jump to Mode.

Figure 19. Scope Record Single Sweep

8	Select on EXT to open the
	Start Single Sweep on Ext.
	menu.

9	Select positive slope and jump to
	Level.
10	Select 1.2 V and accept all
	recorder options.

33