Fluke 196, 199 Trigger and Delay, Automatic Connect-and-View Trigger, Edge Trigger, Video Trigger

Specifications	9
Dual Input Oscilloscope

Record Length
Scope Record Mode	27500 points on each input
Scope Normal Mode	1000 points on each input

Scope Glitch Capture Mode... 500 points on each input

Glitch Detection
5 ∝s to 120 s/div	displays glitches as fast as 50 ns
Waveform Display	A, B, A+B, A-B, A*B, A vs B
Normal, Average (2,4,8,64 x), Persistence
Time Base Accuracy	±100 ppm

Trigger Level Control Range	.........................±4 divisions
Trigger Sensitivity A and B
DC to 5 MHz at >5 mV/div	........................0.5 divisions
DC to 5 MHz at 5 mV/div	1 division
200 MHz (FLUKE 199)	1 division
250 MHz (FLUKE 199)	2 divisions
100 MHz (FLUKE 196)	1 division
150 MHz (FLUKE 196)	2 divisions
60 MHz (FLUKE 192)	1 division
100 MHz (FLUKE 192)	2 divisions

Trigger and Delay

Trigger Modes	Automatic, Edge,
	External, Video, Pulse Width
Trigger Delay	up to +1000 divisions
Pre Trigger View	one full screen length
Max. Delay	10 seconds
Automatic Connect-and-View Trigger
Source	A, B, EXT
Slope	Positive, Negative
Edge Trigger
Screen Update	Free Run, On Trigger, Single Shot
Source	A, B, EXT
Slope	Positive, Negative

Isolated External Trigger

Bandwidth		10 kHz
Modes		Automatic, Edge
Trigger Levels (DC to 10 kHz)		................. 120 mV, 1.2 V
Video Trigger
Standards	PAL, PAL+, NTSC, SECAM
Modes	Lines, Line Select, Field 1 or Field 2
Source		A
Polarity		Positive, Negative
Sensitivity		0.7 division sync level

89