Replaying Step-by-Step, Replaying a Waveform | Fluke 192, 199, 196

Fluke 192/196/199

Users Manual

Replaying Step-by-Step

To step through the last scope screens, do the following:

1		From scope mode, open the
		REPLAY menu.
		REPLAY menu.

Observe that the trace is frozen and that REPLAY appears at the top of the screen (see Figure 21).

2						Step through the previous
2						Step through the previous
						screens.

3 Step through the next screens.

Observe that the bottom of the waveform area displays the replay bar with a screen number and related time stamp:

Figure 21. Replaying a Waveform

The replay bar represents all 100 stored screens in memory. The icon represents the picture being displayed on the screen (in this example: SCREEN -84). If the bar is partly white, the memory is not completely filled with 100 screens.

From this point you can use the zoom and cursor functions to study the signal in more detail.

36

Image 44

Fluke 192, 199, 196 user manual Replaying Step-by-Step, Replaying a Waveform

Contents

Fluke 192/196/199 Page Limited Warranty & Limitation of Liability Service Centers Table of Contents Using The Multimeter Using The Recorder FunctionsUsing Replay, Zoom and Cursors Fluke 192/196/199 Iii Specifications Index Declaration of Conformity ManufacturerStatement of Conformity Sample tests Unpacking the Test Tool Kit ScopeMeter Test Tool Kit Description # Description Safety Information Read First Safety Information Read First Impair the protection provided by the equipment If Safety Features are ImpairedUse of the test tool in a manner not specified may About this Chapter Using The ScopePowering the Test Tool Resetting the Test Tool Screen After Reset Navigating a Menu Open the Waveform Options Hiding Key Labels and Menus Input Connections Making Scope Connections Scope Connections Displaying an Unknown Signal with Connect-and-View Screen After an Auto Set Measurement Making Automatic Scope MeasurementsSelect the Peak-Peak Freezing the Screen Hz and V peak-peak as Scope Readings Jump to Waveform Using Average, Persistence and Glitch CaptureUsing Average for Smoothing Waveforms Persistence , then select Infinite Using Persistence to Display WaveformsJump to Waveform and Select Displaying Glitches Suppressing High Frequency Noise Reversing the Polarity of the Displayed Waveform Acquiring WaveformsSelecting AC-Coupling Select 10kHz HF reject to Analyzing Waveforms Mathematics... to openMathematics menu Or a vs B Using The Multimeter Making Meter Connections Making Multimeter Measurements Measuring Resistance Values Making a Current Measurement Highlight a acOpen the Current Probe Submenu Ampere Measurement Readings Freezing the Readings Selecting Auto/Manual Ranges Making Relative Measurements Making a Relative Measurement Using The Recorder Functions Opening the Recorder Main Menu Highlight Trend Plot Scope Plotting Measurements Over Time TrendPlotStarting a TrendPlot Function Displaying Recorded Data TrendPlot Reading Changing the Recorder Options Turning Off the TrendPlot DisplayOpen the Recorder Options Menu Highlight Scope Record Recording Scope Waveforms In Deep Memory Scope RecordStarting a Scope Record Function Using ScopeRecord in Single Sweep Mode Level Using Scope Record in Triggered Single Sweep ModeJump to Display Glitches Select Yes, then jump to Mode Analyzing a TrendPlot or Scope Record Triggered Single Sweep Recording Using Replay, Zoom and Cursors Replaying the 100 Most Recent Scope Screens Replaying Step-by-Step Replaying a Waveform Capturing 100 Intermittents Automatically Replaying ContinuouslyTurning Off the Replay Function Zooming in on a Waveform Zooming in a Waveform Displaying the Zoomed Waveform Turning Off the Zoom Function Using Horizontal Cursors on a Waveform Making Cursor Measurements Using Vertical Cursors on a Waveform Turn off the cursors Using Cursors on a A+B, A-B or A*B Waveform Making Rise Time Measurements Triggering on Waveforms Setting Trigger Level and Slope Screen with all Trigger Information Using Trigger Delay or Pre-trigger Trigger Delay or Pre-trigger View Open the Automatic Trigger Automatic Trigger OptionsOpen the Trigger Options menu Triggering on Edges Open the Trigger Options menu Open the Trigger on Edge menuSelect Free Run, jump to Noise Reject Filter Triggering on Noisy Waveforms Making a Single AcquisitionSelect On Trigger, jump to Noise Set Noise reject Filter to On Making a Single Shot Measurement Label Triggering on External WaveformsSelect 1.2V under the Ext Level Triggering on Video Signals Triggering on Video Lines Enable video line selectionTriggering on Video Frames Select On Trigger Triggering on PulsesDetecting Narrow Pulses Triggering on Narrow Glitches Finding Missing Pulses Open the Trigger Options menu Select On Trigger Triggering on Missing Pulses Using Memory, PC and Printer Saving and Recalling Saving Screens with Associated Setups Display the SAVE/PRINT key labels Deleting Screens with Associated SetupsRecalling Screens with Associated Setups Recalling a Setup Configuration Viewing Stored Screens Scroll through all stored screens Connecting to a Computer Documenting Screens Connecting to a Printer Connecting a Serial Printer Setting up the Printing Configuration Open the Printer Setup submenuPrinting a Screen Baud Rate Fluke 192/196/199 Using the Standard Accessories Tips Probing Using 2-mm Heavy Duty Test Probes Heavy Duty Fixed Connections for Scope Tips Using the Standard Accessories Using the Independently Floating Isolated Inputs Measuring Using Independently Floating Isolated Inputs Tips Using the Independently Floating Isolated Inputs Using the Tilt Stand Suppressing Key Labels and Menu’sTurn the test tool off Press and hold Adjusting the Contrast and Brightness Changing the Information LanguageOpen the Language Select Accept French as the language Open Date Adjust menu Changing Date and TimeChoose 1999, jump to Month Choose 04, jump to Day Saving Battery Life Setting the Power Down Timer Open the User Options menu Open the Auto Set Adjust Menu Changing the Auto Set OptionsTo Coupling Select Unchanged Storing the Test Tool Cleaning the Test ToolMaintaining the Test Tool Charging the Batteries Charging the Batteries Extending Battery Operation Time Open the User Options menu Replacing the NiMH Battery Pack BP190 Calibrating the Voltage ProbesSelect 101, then return Select Voltage, then jump to Maintaining the Test Tool Parts and Accessories Standard AccessoriesDisplaying Calibration Information Open the Version & Calibration Standard Accessories Ordering Code TL24 General Purpose Leads RS200 Optional Accessories Troubleshooting Battery Operated Fluke Accessories Do Not Function FlukeView Does Not Recognize The Test Tool Specifications Performance CharacteristicsSafety Characteristics Introduction Horizontal Dual Input OscilloscopeIsolated Inputs a and B Vertical Trigger and Delay Automatic Connect-and-View TriggerEdge Trigger Isolated External Trigger Automatic Scope Measurements AC Voltage VAC AC+DC Voltage True RMS Amperes AMP PeakFrequency Hz Duty Cycle Duty Power PhaseTemperature Temp Decibel dB Meter DMM Measurements on Meter Inputs With Optional Temperature Probe Diode Scope Record RecorderTrendPlot Meter or Scope Zoom, Replay and Cursors Miscellaneous Probe Calibration MemoryOptical InterfacePort Mechanical Environmental Max. Floating Voltage SafetyMax. Input Voltages Safety Electrical specificationsProbe Environmental 102 Electromagnetic Immunity Disturbance less than 10% of full scale = 3V/m 104 Index Numerics 106 107 108